Seagull Models Extra 260 Spezifikationen Seite 18

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 23
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 17
EXTRA 260. Instruction Manual.
18
! 3) Install the muffler and muffler extension
onto the engine and make the cutout in the
cowl for muffler clearance. Connect the fuel
and pressure lines to the carburetor, muffler
and fuel filler valve. Secure the cowl to fuse-
lage using the 3x10mm screws (4).
opening. Use the spinner backplate as a guide.
Hold the cowl firmly in place using pieces of
masking tape.
The propeller should not touch any part
of the spinner cone. If it does, use a sharp
modeling knife and carefully trim away the
spinner cone where the propeller comes in
contact with it.
Install the spinner backplate, propeller and
spinner cone.
INSTALLING THE SPINNER.
1.5mm wire
(needle valve).
! 2) While keeping the back edge of the
cowl flush with the marks, align the front of
the cowl with the crankshaft of the engine. The
front of the cowl should be positioned so the
crankshaft is in nearly the middle of the cowl
Because of the size of the cowl, it may be
necessary to use a needle valve extension
for the high speed needle valve. Make this
out of sufficient length 1.5mm wire and install
it into the end of the needle valve. Secure the
wire in place by tightening the set screw in the
side of the needle valve.
Trim and cut.
3 x 10mm.
Seitenansicht 17
1 2 ... 13 14 15 16 17 18 19 20 21 22 23

Kommentare zu diesen Handbüchern

Keine Kommentare

Lorex SG5550P manuály

Uživatelské manuály a uživatelské příručky pro Bezpečnostní systémy pro řízení přístupu Lorex SG5550P.
Poskytujeme 1 manuály pdf Lorex SG5550P ke stažení zdarma podle typů dokumentů: Datový list






Další produkty a příručky pro Bezpečnostní systémy pro řízení přístupu Lorex

Modely Typ Dokumentu
Žádný