www.seagullmodels.com
17
! 6) Attach the Z-Bend in the pushrod wire to
the throttle arm on the carburetor. You will need
to remove the throttle arm from the car- buretor
to be able to attach the Z-bend. When
complete, re-attach the throttle arm to the car-
buretor.
! 5) Bolt the engine to the engine mount using
the four machine screws. Double check that
all the screws are tight before proceeding.
4.2mm.
4x30mm.
Engine .91 - 2 stroke.
4x30mm.
Pushrod wire.
Engine 1.25 - 4 stroke.
140mm.
COWLING.
! 1) Slide the fiberglass cowl over the en-
gine and line up the back edge of the cowl with
the marks you made on the fuselage then trim
and cut.
Pushrod wire.
3x10mm.
Trim and cut.
Kommentare zu diesen Handbüchern