Seagull Models Funfly 3D Spezifikationen Seite 22
- Seite / 24
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
SEAGULL FUNFLY 3D. Instruction Manual.
22
4) Drill through the bottom of the rudder
with the 2mm drill.
5) Using a toothpick insert a small amount
of the epoxy in the hole in the bottom of the
rudder. Insert the vertical tailwheel wire into the
hole with the epoxy and mount the nylon
brackets to the rudder with the hardware
included.
INSTALLATION PILOT AND CANOPY.
2
1
1) Locate items necessary to install pilot, and
canopy.
2) A scale pilot is included with this ARF. The
Seagull Pilot included fitting well to the cockpit.
(or you can order others scale pilot figures
made by Seagull factory. They are available at
Seagull distributors.)
3) Position the pilot figure on the canopy floor
as show. Locate the oval shaped on the canopy
floor and remove the covering. Use epoxy to
glue this into the base of the pilot figure and
glue the cockpit panel in place with C/A glue,
please see pictures as shown.
If you are going to install a pilot figure, please
use a sanding bar to sand the base of the figure
so that it is flat.
M2 x 12mm.
C/A glue.
2
25mm.
1
M2 x 12mm.
2mm.
2mm.
C/A glue.
Verwandte Produkte und Handbücher für Ferngesteuertes Spielzeug Seagull Models Funfly 3D
(28 Seiten)Sony VGC-RB33GY Handbücher
Bedienungsanleitungen und Benutzerhandbücher für Computers Sony VGC-RB33GY.
Wir stellen 1 PDF-Handbücher Sony VGC-RB33GY zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Bedienungsanleitung
Kommentare zu diesen Handbüchern